Cable with crank mechanism for window regulator Fiat 124 Spider (66-82)
Product information "Cable with crank mechanism for window regulator Fiat 124 Spider (66-82)"
Can be used for left or right.
| FIAT 124 Spider AS (1400) |
| FIAT 124 Spider BS (1400) |
| FIAT 124 Spider BS1 (1600) |
| FIAT 124 Spider CS (1600) |
| FIAT 124 Spider CS0 (2000) |
| FIAT 124 Spider CS1 (1800) |
| FIAT 124 Spider CS2 (2000) |
| FIAT 124 Spider CSA (1800) |
| FIAT 124 Spider DS (2000) |
Attention: before dismantling the old part, mark the rope path! When the new part is mounted, grease the rope and crank mechanism (we use spray grease item no.: 1090015) before clamping the pulley to the rope. Then crank several times from one end to the other so that the rope lies correctly on the drum and can be cranked without cracking and other noises. If necessary, help it along by hand and mount the pulley. Make sure that the upper stop (plate with slotted hole behind the pulley) is adjusted so that the pulley does not move beyond the guide. If the stop is adjusted correctly, but the gap to the hood is too large, the triangular window frame must also be adjusted. In this case, the upper window stop must also be adjusted again.
