Gearbox new without bell, rear housing + shift rods Fiat 124 Spider, 124 Coupé
Product information "Gearbox new without bell, rear housing + shift rods Fiat 124 Spider, 124 Coupé"
The gearbox is a new gearbox from old stock, with an identical design. Because it is a new gearbox and we start at 0, the noise is often significantly lower. Please do NOT compare with current vehicles, as this gearbox design also dates from the early 60s!
We deliver the gearboxes only completely ready for installation! for this we need the following CLEANED parts of your old gearbox 1.gearbox bell housing 2.rear gearbox housing, 3, the shift neck and 4.the 3 shift rods. Of course, we can also offer you a complete rebuild! Please contact us for this.
You will find further information under Installation instructions!
| FIAT 124 Coupe AC (1400) |
| FIAT 124 Coupe BC (1400) |
| FIAT 124 Coupe CC (1600) |
| FIAT 124 Spider AS (1400) |
| FIAT 124 Spider BS (1400) |
| FIAT 124 Spider BS1 (1600) |
| FIAT 124 Spider CS (1600) |
| FIAT 124 Spider CS0 (2000) |
| FIAT 124 Spider CS1 (1800) |
| FIAT 124 Spider CS2 (2000) |
| FIAT 124 Spider CSA (1800) |
| FIAT 124 Spider DS (2000) |
| FIAT 124 Spider VX (2000) |
ATTENTION: Only mineral gear oil 85/W 90 may be used. Approx. 1.8 litres are required. After approx. 500-1500 km, the gearbox oil must be changed, as increased wear occurs when the new gearbox is run in and this can lead to irritations when changing gears. Give your new gearbox time to run in during the first 1,500 km so that you can enjoy it for a long time.
Fill the gearbox oil at the green arrow, not at the upper one, which is crossed out in red!
