Insulating mat for floor panel Fiat 124 Spider
Product information "Insulating mat for floor panel Fiat 124 Spider"
Size 100 x 50 cm
Betum and felt
Mounting instructions:
Attention: When mounting, make sure that the surface is dust-free and free of old adhesive residues or grease! The PU foam can be glued with body glue up to 180 degrees (glue article no.: 1090019) or with double-sided adhesive tape (article no.: 1098045).
Since the Spider was built to be driven open, you can save yourself the effort with the insulation, since the insulation effect is hardly noticeable when driving open anyway.dsWhen the car is closed, the noise comes more from above (soft top, windscreen, etc.).
| FIAT 124 Spider AS (1400) |
| FIAT 124 Spider BS (1400) |
| FIAT 124 Spider BS1 (1600) |
| FIAT 124 Spider CS (1600) |
| FIAT 124 Spider CS0 (2000) |
| FIAT 124 Spider CS1 (1800) |
| FIAT 124 Spider CS2 (2000) |
| FIAT 124 Spider DS (2000) |
| FIAT 124 Spider VX (2000) |
Note: When installing, ensure that the ground dust-free and free from old adhesive residues or grease! The PU foam, Article Nr.:1090019)
oder with chassis glue to 180 degrees (adhesive with double-sided tape (Part No .: glued 1098045).
Since the Spider built for was to drive open, can you look at the expenditure with the insulation also save because, barely
can be felt when driving anyway the insulating effect. When closed down the noises coming from 100 km / h rather from above (top, windshield, etc.).
